Workshop · Workshops and builds
Midori Seibi: the Yokohama workshop that rebuilds Skyline GT-Rs
Fifty years of Nissan maintenance in Yokohama, and more than thirty years of work on the RB26 engine. Who Midori Seibi is, how it works, and why the TOPRANK group sends GT-Rs there.
Published on · 6 min read · TOPRANK Europe

Midori Seibi Center is a small company in Yokohama. It started as a Nissan service garage in 1976, began tuning the Skyline GT-R in 1990, and today presents the GT-R and its RB26 engine as the heart of its work.
It is also one of the partner workshops of the Tuning Program run by the TOPRANK group in Japan. Here is what the workshop says about itself, and what the group says about working with it.
A Nissan garage, first
The company, Midori Seibi Center Co., Ltd., was founded in February 1976 in Midori ward, Yokohama. Its name comes from there: “Midori” is the ward, “Seibi” means maintenance. In 1994 the ward boundaries changed and the workshop's address moved to Tsuzuki ward. In May 2026, in the year of its 50th anniversary, the company moved to a new workshop, back in Midori ward.
From the start, the workshop was approved by Nissan as a partner service garage, and certified by the regional transport bureau. That is the point Midori Seibi itself puts forward: it can service any Nissan to the maker's standard, and it uses Nissan's CONSULT-III diagnostic system, as a dealer does.
Fifty years in a few dates
| Year | What happened |
|---|---|
| 1976 | Company founded in Midori ward, Yokohama. Approved as a Nissan partner service garage. |
| 1983 | Starts tuning the engine computer of the Skyline 2000 RS (DR30). |
| 1988 | Installs a four-wheel alignment tester and a chassis dynamometer. |
| 1990 | Opens an engine test room and starts tuning the Skyline GT-R (BNR32). |
| 1996 | Installs a Dynapack four-wheel dynamometer. |
| 2005 | Installs a 3D alignment tester. |
| 2007 | Adopts Nissan's CONSULT-III diagnostic system. |
| 2020 | Launches an R134a air-conditioning kit for the R32 GT-R. |
| 2026 | 50th anniversary in February. Move to a new workshop in May. |
Maintenance before power
Midori Seibi's approach to the GT-R is easy to sum up: a car must be fully serviced before it is tuned. The workshop recalls that the R32 GT-R came out in 1989 rated at 280 PS, because of a limit that Japanese makers set themselves, and that the car had more in it.
But tuning a car whose base is tired, it writes, halves the benefit and can create new problems. So the order is: maintenance first, then a light tune (suspension, steering, dampers and springs, intake and exhaust, then the engine computer to bring it all together). A full engine build comes after, for those who want to go further.
The RB26 engine, by hand
The RB26DETT is the twin-turbo straight six of the R32, R33 and R34 GT-R. Midori Seibi offers its own engine for it, the MIDORI High-Power Engine. It is not a fixed package. The workshop proposes the specification and the parts for each car, according to what the owner wants, the budget and how the car will be used.
- Base: a precision overhaul of the cylinder block and the cylinder head.
- Ports and combustion chambers: machined on a numerically controlled machine from data built up over the years, then finished by hand.
- Valve springs: the rate of each spring is measured, one by one, to balance the set.
- Aim: less friction, so the engine makes its power without raising the boost.
Around the engine, the workshop lists the rest of its work: inspections and servicing, gearbox, differential and suspension, brakes, engine computer tuning, bodywork and paint. Engines and gearboxes are assembled in a temperature-controlled clean room. Its Dynapack dynamometer, rated for up to 1,200 hp, is used to measure power and also to check fuelling and knock at each engine speed.

What the TOPRANK group says
Midori Seibi Center is one of the four partners named by the TOPRANK group for its Global Tuning Program, with Built By Legends, Garage Yoshida and MINE'S. The group writes that its partners are chosen for their reputation, their expertise and their fit with its own values.
On its page about the workshop, the group presents Midori Seibi as a specialist in high-performance upgrades for the Skyline, especially the GT-R and its RB26DETT, with work that goes from basic maintenance to full performance tuning, for the road or for the circuit. The group's track day at Fuji Speedway in 2025 also welcomed a Midori Seibi R35 GT-R.
One example: Dustin's R34
The group has followed one project closely, that of a customer called Dustin. He bought his R34 GT-R in 2019. Midori Seibi built a high-specification engine for it. The car stayed in Japan, in TOPRANK's storage, until it was old enough to be imported into the United States, in 2024.
While it waited, Dustin drove it in Japan under the group's registration plan. The car reached the United States in September 2024. In February 2026 he published a video that breaks down the whole project: the purchase of the car, storage and logistics, restoration and upgrades, labour and tuning. We do not quote its figures: each project is different, and a figure taken out of context says little about yours.
For a buyer in Europe
The principle of the Tuning Program is simple: the car is already in Japan, so the work is done there, during storage or before shipping. TOPRANK sends the car to the workshop suited to the job, its own mechanics or a partner such as Midori Seibi.
One point deserves care. In France and in Germany, collector status at 30 years is for cars kept in their original condition. A modified GT-R can still be registered, but by individual approval, and each modification then has to be documented and accepted. We look at this with you before the work is ordered.
Questions
Does Midori Seibi only work on GT-Rs?
No. Its services also cover the Fairlady Z (Z33 and Z34) and other cars, and as a Nissan-approved garage it services Nissans in general. The GT-R, from the R32 to the R35, is its best-known speciality.
Is Midori Seibi part of TOPRANK?
No. It is an independent company. TOPRANK in Japan works with it as a partner of its Tuning Program.
How much does an engine build cost?
There is no public price. The specification is decided car by car, so the cost is too. Through the Tuning Program, you receive a written quote before any work starts.
Can the work be done on a car I buy through TOPRANK?
Yes, that is the usual case: the car is bought in Japan, the work is done there, then the car is stored or shipped. Tell us which car and what you have in mind.
Sources
The facts in this article come from the sources below.
- Midori Seibi Center — company profile and history (Japanese)
- Midori Seibi Center — GT-R tuning (Japanese)
- Midori Seibi Center — MIDORI High-Power Engine for the RB26DETT (Japanese)
- Midori Seibi Center — home page (Japanese)
- TOPRANK Global — Midori Seibi
- TOPRANK Global — Global Tuning Program
- TOPRANK Global — Building Dreams: Dustin and the R34 GT-R (February 2024)
- TOPRANK Global — Dustin's Dream Car: from engine build to Japan adventure (May 2024)
- TOPRANK Global — Dustin's R34 Skyline GT-R is now on US soil (September 2024)
- TOPRANK Global — Toprank Track Day 2025 at Fuji Speedway
- TOPRANK Global — Breaking down the real cost of Dustin's Midori Seibi R34 GT-R (February 2026)
Keep reading
Your plans
A question about your car?
Tell us what you are looking for. We answer in French, English or German.


